The sample for Microservice Builder is intended to run on top of the Microservice Builder fabric and also to utilize the ELK sample. As such, the Kubernetes configuration for the microservice pods all bind to a set of resources (secrets and config-maps) created by the Helm charts for the fabric and ELK sample. The slightly annoying thing is that the sample would work perfectly well without these (you just wouldn’t get any logging to the ELK stack) only, as we shall see in a moment, deployment fails if the fabric and ELK sample have not already been deployed. In this post we’ll explore a few possibilities as to how these resources could be made optional.
I’m going to assume a minikube environment here and we’re going to try to deploy just one of the microservices as follows:
|
|
git clone git@github.com:WASdev/sample.microservicebuilder.session.git cd sample.microservicebuilder.session eval $(minikube docker-env) docker build -t microservice-session . kubectl apply -f manifests |
If you then perform a
kubectl describe for the pod that is created you’ll see that it fails to start as it can’t bind the volume mounts:
|
|
FirstSeen LastSeen Count From SubObjectPath Type Reason Message --------- -------- ----- ---- ------------- -------- ------ ------- 1m 1m 1 default-scheduler Normal Scheduled Successfully assigned microservice-session-sample-3309272859-6241s to minikube 1m 1m 1 kubelet, minikube Normal SuccessfulMountVolume MountVolume.SetUp succeeded for volume "default-token-nfzj9" 1m 18s 8 kubelet, minikube Warning FailedMount MountVolume.SetUp failed for volume "liberty-config" : configmaps "liberty-logging-config" not found 1m 18s 8 kubelet, minikube Warning FailedMount MountVolume.SetUp failed for volume "truststore" : secrets "mb-truststore" not found 1m 18s 8 kubelet, minikube Warning FailedMount MountVolume.SetUp failed for volume "keystore" : secrets "mb-keystore" not found |
Elsewhere in the output though you’ll see a clue to our first plan of attack:
|
|
Volumes: keystore: Type: Secret (a volume populated by a Secret) SecretName: mb-keystore Optional: false |
Doesn’t that
optional flag look promising?! As of Kubernetes 1.7 (and thanks to my one-time colleague Michael Fraenkel) we can mark our usage of secrets and config-maps as optional. Our revised pod spec would now look as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 |
spec: containers: - name: microservice-session image: microservice-session:latest ports: - containerPort: 9080 imagePullPolicy: IfNotPresent env: - name: MB_KEYSTORE_PASSWORD valueFrom: secretKeyRef: name: mb-keystore-password key: password optional: true - name: MB_TRUSTSTORE_PASSWORD valueFrom: secretKeyRef: name: mb-truststore-password key: password optional: true volumeMounts: - name: keystore mountPath: /etc/wlp/config/keystore - name: truststore mountPath: /etc/wlp/config/truststore - name: liberty-config mountPath: /config/configDropins readinessProbe: httpGet: path: /sessions/nessProbe port: 9080 volumes: - name: keystore secret: secretName: mb-keystore optional: true - name: truststore secret: secretName: mb-truststore optional: true - name: liberty-config configMap: name: liberty-logging-config items: - key: keystore.xml path: defaults/keystore.xml - key: logging.xml path: defaults/logging.xml optional: true |
And lo and behold, with that liberal sprinkling of optional attributes we can now successfully deploy the service without either the fabric or ELK sample. Success! But why stop there? All of this is boilerplate that is repeated across all our microservices. Wouldn’t it be better if it simply wasn’t there in the pod spec and we just added it when it was needed? Another new resource type in Kubernetes 1.7 comes to our rescue: the PodPreset. A pod preset allows us to inject just this kind of configuration at deployment time to pods that match a given selector.
We can now slim our deployment down to the bare minimum that we want to have in our basic environment:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 |
apiVersion: extensions/v1beta1 kind: Deployment metadata: name: microservice-session-sample spec: replicas: 1 template: metadata: labels: name: session-deployment runtime: liberty spec: containers: - name: microservice-session image: microservice-session:latest ports: - containerPort: 9080 imagePullPolicy: IfNotPresent readinessProbe: httpGet: path: /sessions/nessProbe port: 9080 |
Note that we have also added that
runtime: liberty label to the pod which is what we’re going to use to match on. In our advanced environment, we don’t want to be adding the resources to every pod in the environment, in particular, we don’t want to add it to those that aren’t even running Liberty. This slimmed down deployment works just fine, in the same way that the optional version did.
Now, what do we have to do to get all of that configuration back in an environment where we do have the fabric and ELK sample deployed? Well, we define it in a pod preset as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 |
apiVersion: settings.k8s.io/v1alpha1 kind: PodPreset metadata: name: logging-pod-preset spec: selector: matchLabels: runtime: liberty env: - name: MB_KEYSTORE_PASSWORD valueFrom: secretKeyRef: name: mb-keystore-password key: password - name: MB_TRUSTSTORE_PASSWORD valueFrom: secretKeyRef: name: mb-truststore-password key: password volumeMounts: - name: keystore mountPath: /etc/wlp/config/keystore - name: truststore mountPath: /etc/wlp/config/truststore - name: liberty-config mountPath: /config/configDropins volumes: - name: keystore secret: secretName: mb-keystore - name: truststore secret: secretName: mb-truststore - name: liberty-config configMap: name: liberty-logging-config items: - key: keystore.xml path: defaults/keystore.xml - key: logging.xml path: defaults/logging.xml |
Note that the selector is matching on the label that we defined in the pod spec earlier. Now, pod presets are currently applied by something in Kubernetes called admission control and, because they are still alpha, minikube doesn’t enable the admission controller for PodPresets by default. We can enable it as follows:
|
|
minikube start --extra-config=apiserver.Admission.PluginNames=\ NamespaceLifecycle,LimitRanger,ServiceAccount,PersistentVolumeLabel,\ DefaultStorageClass,ResourceQuota,DefaultTolerationSeconds,PodPreset |
(Note that, prior to minikube v0.21.0 this property was called apiserver.GenericServerRunOptions.AdmissionControl, a change that cost me half an hour of my life I’ll never get back!)
With the fabric, ELK sample and pod preset deployed, we now find that our pod regains its volume mounts when deployed courtesy of the admission controller:
|
|
Environment: MB_KEYSTORE_PASSWORD: <set to the key 'password' in secret 'mb-keystore-password'> Optional: false MB_TRUSTSTORE_PASSWORD: <set to the key 'password' in secret 'mb-truststore-password'> Optional: false Mounts: /config/configDropins from liberty-config (rw) /etc/wlp/config/keystore from keystore (rw) /etc/wlp/config/truststore from truststore (rw) /var/run/secrets/kubernetes.io/serviceaccount from default-token-tl2hz (ro) |
Pod presets are tailor-made for this sort of scenario where we want to inject secrets and config maps but even they don’t go far enough for something like Istio where we want to inject a whole new container into the pod (the Envoy proxy) at deployment time. Admission controllers in general also have their limitations in that they have to be compiled into the API server and, as we’ve seen, they have to be specified when the API server starts up. If you need something a whole lot more dynamic that take a look at the newly introduced initializers.
One last option for those who aren’t yet on Kubernetes 1.7. We’re in the process of moving our generated microservices to use Helm and in a Helm chart template you can make configuration optional. For example, we might define a
logging option in our values.yaml with a default value of
disabled , and then we can define constructs along the following lines in our pod spec:
|
|
spec: containers: - name: microservice-session image: microservice-session:latest ports: - containerPort: 9080 imagePullPolicy: IfNotPresent env: {{- if eq .Values.logging "enabled"}} - name: MB_KEYSTORE_PASSWORD valueFrom: secretKeyRef: name: mb-keystore-password key: password {{- end}} |
Then all we’ve got to do when we’re deploying to our environment with the fabric and ELK sample in place is to specify an extra
--set logging=enabled on our helm install. Unlike the pod preset, this does mean that the logic is repeated in the Helm chart for every microservice but it certainly wins on the portability stakes.
The Hampshire Cross-Country Champs were back at Fairthorne Manor again this year. With some heavy rain over the preceding few days, it was a return to the conditions of two years ago: mud and more mud. It could have been worse though as the route of the course steadily evolved over the day as the tapes were adjusted to avoid some of the stickiest spots.
As is customary, the ladies race went first and the children and I flitted from one part of the course to another to catch sight of Christine as many times as we could. I then left them to meet her at the finish whilst I stripped off more layers than felt advisable and had a quick warm up trying to find the toilets (they had been right behind me!). I started fairly steadily but, for a change, after the first two laps I was still overtaking people and wasn’t experiencing any heaviness in my legs or nausea. I finished in a fairly respectable 56th place, fourth V40 and, together with my Eastleigh teammates, we bagged third place in the veteran team competition.
RSS - Posts